Thursday, May 29, 2014

Basic of Shoes- Bottom Parts

9 comments
Last part of the Basic of shoes series. Here is the first three parts
1. Basic of Shoes
2. Basic of Shoes- Leather Upper
3. Basic of shoes- Synthetic and Others
  • Rubber: Rubber is used for the upper when the sole is made of the same material.
  • Bottoms: The types of materials commonly used in shoe bottoms are:
    • Leather
    • Rubber
    • Plastic
  • Leather: The larger and thicker leather skins are used for bottoms. The insoles are cut from the bellies and the outsoles from the skin cut along the backbone where the leather has the greatest abrasion resistance. The properties of leather of bottoms are:
    • Great abrasion resistance
    • Expensive: Leather is generally more expensive then most rubbers or plastic. That is why it is mainly used in high quality footwear.
    • Less durable than most other materials: Leather is chosen for its attractive appearance rather than durability, which is lower compared with most other materials.
          The properties of rubber for bottoms are:
    • Hard wearing
    • Flexible
    • Waterproof
    • Easier and less expensive to produce than leather
               Today, most types of rubber are likely to be based on the general-purpose synthetic rubber denoted S.B.R., rather than the traditional natural rubber obtained from rubber trees. Soles made from these two types of rubber are vulcanized (except crepe) and have similar properties. Vulcanized soles are sometimes referred to as "Composition rubbers" because they are made up of a number of ingredients added to the basic rubber to control the properties. Some black compounds may have a tendency to mark floors depending on the quantity of carbon black in the mix. The soles are used in a wide variety of footwear from heavy-duty to general purpose.
  • Rubber bottoms vary in type, including:
    • Translucent rubber-vulcanized: Translucent rubber is a high-quality vulcanized rubber, either natural or synthetic. It contain silica and it is usually available in "natural" colors ranging from off-white to light brown.
    • Resin rubber-vulcanized: Resin rubber was developed in the early 1950s to simulate leather. It is a firm type of vulcanized rubber based on a synthetic SNR-rubber, reinforced with a high styrene resin.
    • Microcellular rubber-vulcanized: Microcellular rubber is basically a resin rubber with a cellular structure. During vulcanization the rubber is expanded by a blowing agent which forms numerous small, non-interconnection cells.
    • Sponger rubber-vulcanized: Sponge rubber is used for sole for felt or cloth slippers. It has a spongy, cellular structure and it is covered with a thin, solid skin. it is vulcanized directly to the upper.
    • Crepe-not vulcanized: Crepe is obtained directly from the rubber latex, the milky liquid from rubber trees, by coagulation the rubber particles and milling them into sheets. It is lightweight, flexible, hard-wearing and comfortable to wear. The downside of crepe is that it will deteriorate if contaminated by oil, petrol or chemicals. If subjected to heat, sole will discolor and become soft and tacky. It is frequently used for soles of stitchdown shoes and sandals.
  • Plastic: Polyvinyl chloride (PVC) is cement lasted as a molded unit or directly injected to the upper. PVC is the main synthetic used for shoe soling. The PVC polymer is hard, but when used for soling it is softened by the addition of plasticisers. It can be either used as "direct injection" to the upper or as a stuck-on unit, "Cement lasted." The Properties of PVC bottoms are:
    • Hard wearing
    • Flexible
    • Soft
    • Can slip when cold
  • Thermoplastic Rubber (TPR) is directly injected to the upper. TPR can be injection molded. It was originally developed for soling to simulate crepe and soft vulcanized rubbers. The properties of TPR of bottoms are:
    • Looks and feels rubbery
    • Lighter than vulcanized rubber or PVC
    • Good traction
    • Excellent cold track resistance
    • Low cost
  • Ethylene Vinyl Acetate (EVA) is used in an expanded form. Normally used in expanded form either on its own or blended with S.B.R. It is used fro outsole in lightweight footwear and midsoles in trainers. The properties of EVA for bottoms are:
    • Much lighter than conventional SBRs microcellular rubbers but with the same durability.
    • Flexible and resilient
    • Good ground insulation
    • Used as outsoles in lightweight footwear
    • Used as midsoles in trainers.
  • Polyurethane(PU) can be blended to be solid, cellular, flexible or rigid. Normally for shoe the blend is a flexible cellular structure. For top-pieces the solid, rigid from is used. PU is a very hard wearing polymer resistant to most chemicals. Used frequently as a two-part sole material with a thin solid PU-polymer and a blown PU-material for most of the sole making. It is frequently used for safety footwear. The properties of PU for bottoms are:
    • Light in weight, flexible and resilient 
    • Good ground insulation
    • Most durable of the cellular soling.
If You Enjoyed This, Take 5 Seconds To Share It

9 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. Thanks for the informative post! Buy men's rust shoes online that is perfect blend of style and comfort.

    ReplyDelete
  3. Great piece of information. Very informative. Thanks for sharing this with us.

    ReplyDelete
  4. resilient flooring manufacturer

    HSE Surface is a 10-year manufacturer of safe synthetic sports surfaces and artificial turf for running tracks and sport court as well as playground.

    ReplyDelete
  5. Great blog, Thank you for sharing this with us.

    If you are Searching one of the best Safety Shoe Leather Manufacturers Nehal Leather Works is a trusted name.

    ReplyDelete
  6. Are you tired of wearing the same old sneakers? Want to step up your style - Look no further than the Air Jordan 3

    ReplyDelete

Eagerly waiting for your valuable comments.